COVID-19 Screening Kits - VIKAND Solutions

PREPARE TO SET SAIL WITH THE RIGHT COVID-19 SCREENING SOLUTION

With no "one-size" fits all COVID-19 screening option on the market, our team of healthcare and maritime experts can help you pinpoint the right screening solution for your vessel or fleet before setting sail.

Meet Your Match

Abbot ID NOW PCR System

5 Minutes for Negative Results & 13 Minutes for Positive Results
Achieves 79.8% Sensitivity and 94.3% Specificity
CE Certified, EUA Certified & CLIA Waived

BD Veritor™ Plus Antigen System

Results in 15 Minutes
Achieves 84% Sensitivity and 100% Specificity
EUA Certified & CLIA Waived

BinaxNOW COVID-19 Card Antigen Test

Results in 15 minutes
Achieves 97.1% sensitivity and 98.5% specificity
EUA Certified & CLIA Waived

CareStart™ COVID-19 Antigen Test

Results in 10 Minutes
Achieves 88.4% Sensitivity and 100% Specificity
EUA Certified, FDA Approved & CLIA Waived

How it Works:

Collect a sample by swabbing the patient’s nose.
Place swab into the extraction vial.
Remove the swab by rotating the extraction vial to release the liquid from the swab, then discard the swab.
Close the vial with the provided cap and push firmly onto the vial.
Mix thoroughly by flicking the bottom of the vial.
Invert the extraction vial and hold the sample vertically above the sample well. Squeeze gently to allow three drops of the sample to fall onto the sample well.
The presence of two colored lines in the control line region “C” and test line “T” will indicate that the patient is positive.
The presence of one colored line in the control line region “C” and test line “T” will indicate that the patient is negative.

Cepheid GeneXpert Express PCR System

Results in 30-45 Minutes
Achieves 100% Sensitivity and 80% Specificity
EUA Certified & CLIA Waived

Coyote Bioscience Mini8 Plus PCR System

Results in 1 hour and 30 minutes
Achieves 95% sensitivity and 95% specificity
CE Certified & CLIA Waived

LumiraDX SARS-CoV-2 Antigen Test

Results in approximately 12 minutes
Achieves 97.6% sensitivity and 96.6% specificity
EUA Certified & CLIA Waived

Panbio™ COVID-19 Ag Rapid Test Device

Results in 15 Minutes
Achieves 91.1% Sensitivity and 99.7% Specificity
CE Certified & WHO EUL

Qiagen QiaSTAT PCR System

Results in approximately 1 hour and 7 minutes
Achieves 95% sensitivity and 99.5% specificity
EUA & CE Certified and CLIA Waived

How it Works:

A nasopharyngeal swab sample is collected.
The nasopharyngeal swab is placed into transport medium.
The sample information is manually written on or a sample label is affixed to the top of a QIAstat-Dx Respiratory Panel Cartridge.
Transport medium liquid sample is loaded manually into the QIAstat-Dx Respiratory Panel Cartridge.
The sample bar code and QIAstat-Dx Respiratory Panel Cartridge QR code are scanned in the QIAstat-Dx Analyzer 1.0.
The QIAstat-Dx Respiratory Panel Cartridge is introduced into the QIAstat-Dx Analyzer 1.0.
The test is started on the QIAstat-Dx Analyzer 1.0.

Quidel Diagnostics Sofia Antigen System

Results in 15 Minutes
Achieves 95% Sensitivity and 100% Specificity
EUA Certified & CLIA Waived

How it Works:

Collect a sample by swabbing the patient’s nose.
Dispense the reagent solution into the reagent tube and swirl until the reagent dissolves.
Place the patient’s sample into the reagent tube and roll it in the solution.
Leave the swab in the reagent tube for one minute.
Remove the swab and insert the pipette into the sample.
Collect the sample in the pipette and empty the contents into the test cassette sample well.
Insert the test cassette into the Sofia System to interpret the results.

Randox/Bosch Vivalytic PCR System

Results in 39 minutes
Sensitivity and Specificity Currently Not Available
CE Certified

How it Works:

The sample is taken from the patient’s nose or throat using a swab.
The sample is then placed into a test tube where it is mixed with a reagent.
Scan the sample code as well as the cartridge code.
Using a pipette, extract the sample from the tube and insert it into the cartridge. Close the cover afterwards.
Insert the cartridge and the test should begin automatically.

TeraGroup COVID-19 Breathalyzer Rapid Test

Results in 45 Seconds
Diagnoses 100% Healthy Individuals, 90% Ill Individuals
CE Certified & Certified By The World Medical Association

Viraspec COVID-19 Saliva Test Kit

Results in 5-10 Minutes
Achieves 90% sensitivity and 99.9% specificity
CE & IVD Certified

How it Works:

Open the cap of the collection tube and install the saliva collector. Put the collection tube with saliva collector close to the lips and let the saliva flow into the collection tube.
Place the collection tube with saliva collector in the workstation. Hold the extraction buffer tube upside down, vertically and squeeze the tube to let the solution drop into the collection tube freely.
Add all extraction buffer to the collection tube.
Tighten the cap onto the specimen collection tube and shake it at least three times vigorously to mix the saliva and the extraction buffer, then squeeze bottom of the collection tube.
Place the test cassette on a clean and level surface. Add three full drops of the solution to the sample well and then start the timer.

PREPARE TO SET SAIL WITH THE RIGHT COVID-19 SCREENING SOLUTION

Meet Your Match

Abbot ID NOW PCR System

BD Veritor™ Plus Antigen System

BinaxNOW COVID-19 Card Antigen Test

CareStart™ COVID-19 Antigen Test

Cepheid GeneXpert Express PCR System

Coyote Bioscience Mini8 Plus PCR System

LumiraDX SARS-CoV-2 Antigen Test

Panbio™ COVID-19 Ag Rapid Test Device

Qiagen QiaSTAT PCR System

Quidel Diagnostics Sofia Antigen System

Randox/Bosch Vivalytic PCR System

TeraGroup COVID-19 Breathalyzer Rapid Test

Viraspec COVID-19 Saliva Test Kit

For more information about our COVID-19 screening solutions, please fill out the form below.